Maker Pro
Maker Pro

avr proteus simulation is not running in real time due to excessive cpu load warning

mammadkhata

Dec 14, 2012
4
Joined
Dec 14, 2012
Messages
4
hello to you electrical engineers.
recently i made a project that is control DC motor in 2 way firs from potentiometer and second from serial push buttons of another avr.
it run good but i have this warning: simulation is not running in real time due to excessive cpu load warning
it causes i'm unable to run successfully on board. can any one help me to solve this?
i uploaded C program and simulation http://ul.to/rnlpqw5d
 

VAT

Dec 10, 2012
12
Joined
Dec 10, 2012
Messages
12
I dont really believe there is a solution for this... those simulations are process heavy,
can you maybe make your design more moduler and test it module by module?

come to think about it...I use to have this problem too... their examples like the chess emulator worked fine but my designs caused this warning too... maybe we had our settings wrongly set up :S

I say I use to because I dont use it anymore
 
Top