P
[email protected]
- Jan 1, 1970
- 0
How does one transform the impedance of a signal from X to Y given a core from
a switched psu (or other easy source). I can figure the wire turns ratio from:
Zp^2 Np^2 Z=Impedance N=Turns
---- = ----
Zs^2 Ns^2
Now how to rule-of-thumb calculate the primary winding turns and area?
What concerns me is overloading the logic chip output and/or line driver.
a switched psu (or other easy source). I can figure the wire turns ratio from:
Zp^2 Np^2 Z=Impedance N=Turns
---- = ----
Zs^2 Ns^2
Now how to rule-of-thumb calculate the primary winding turns and area?
What concerns me is overloading the logic chip output and/or line driver.