Fleethirte
- Aug 23, 2022
- 1
- Joined
- Aug 23, 2022
- Messages
- 1
So I have a battery charger that has quit working.
I am pretty sure it’s the control / charge board.
Transformer seems fine!
My question is, why do I need to bypass the control board and basically just use the transformer manually.
Battery charger is 2,40 and 200 amp unit.
My initial thinking is to put a bridge rectifier on the dc output of the transformer and it should be gtg…. However I am sure it’s not that simple…..
I am pretty sure it’s the control / charge board.
Transformer seems fine!
My question is, why do I need to bypass the control board and basically just use the transformer manually.
Battery charger is 2,40 and 200 amp unit.
My initial thinking is to put a bridge rectifier on the dc output of the transformer and it should be gtg…. However I am sure it’s not that simple…..