Clarkdale44
- Sep 27, 2014
- 4
- Joined
- Sep 27, 2014
- Messages
- 4
Hello
I am building a fluorescent driver circuit that will be powered by 2n3055, i don't have a ferrite toroid but i have two flyback transformer's core(ferrite). I just need to know what is the best way to wind them?
I have previously winded small E type core transformer (Plastic bobbin and E type ferrite core outside), i winded it like first primary then over it feedback then over it secondary.
The circuit above is just for the basic idea of how to wind the ferrite core..It may or may not be the circuit i will build.
The core i have is like the one on the right side of the above image.
As i have got so far, there are two ways to wind a flyback core.
1. Wind it like normal regular transformer, coil above coil on the one side.
2. HV windings on the one side and LV on the other.
Are there any other ways to wind them?
I am quite new to electronics.
Thank you
I am building a fluorescent driver circuit that will be powered by 2n3055, i don't have a ferrite toroid but i have two flyback transformer's core(ferrite). I just need to know what is the best way to wind them?
I have previously winded small E type core transformer (Plastic bobbin and E type ferrite core outside), i winded it like first primary then over it feedback then over it secondary.
The circuit above is just for the basic idea of how to wind the ferrite core..It may or may not be the circuit i will build.
The core i have is like the one on the right side of the above image.
As i have got so far, there are two ways to wind a flyback core.
1. Wind it like normal regular transformer, coil above coil on the one side.
2. HV windings on the one side and LV on the other.
Are there any other ways to wind them?
I am quite new to electronics.
Thank you