Maker Pro
Maker Pro

BK 1431 oscilloscope

wa6rui

Apr 27, 2021
1
Joined
Apr 27, 2021
Messages
1
I have an old BK 1431 oscilloscope ,it has no trace just a dot on the scope that fades away.
I do have a schematic but it is barely readable, I can not make out componets or voltages.
I have tested all the transistors and caps even many resistors but I can s not get this scope
to sweep.
I have resoldered all the boards ,no luck!
I have replace many caps.
I am at a lost with this oscilloscope.
 

Creede

Apr 22, 2021
28
Joined
Apr 22, 2021
Messages
28
I have an old BK 1431 oscilloscope ,it has no trace just a dot on the scope that fades away.
I do have a schematic but it is barely readable, I can not make out componets or voltages.
I have tested all the transistors and caps even many resistors but I can s not get this scope
to sweep.
I have resoldered all the boards ,no luck!
I have replace many caps.
I am at a lost with this oscilloscope.
Check the waveform on the horizontal deflection terminals on the CRT and work back from there.
 
Top