Maker Pro
Maker Pro

blown Bob Parker ESR meter.

E

Everett Cotton

Jan 1, 1970
0
I wasn't paying attention an tried to get read the ESR on a cap in a
hot circuit. Wonder if anyone has made a repair on a smoked Bob Parker
ESR meter. Any help would be appreciated.

Thanks in advanced.

Everett Cotton

[email protected]
 
A

Arfa Daily

Jan 1, 1970
0
Everett Cotton said:
I wasn't paying attention an tried to get read the ESR on a cap in a
hot circuit. Wonder if anyone has made a repair on a smoked Bob Parker
ESR meter. Any help would be appreciated.

Thanks in advanced.

Everett Cotton

[email protected]

Bob usually reads this group, so he may be able to tell you himself !!

Arfa
 
I

ian field

Jan 1, 1970
0
Everett Cotton said:
I wasn't paying attention an tried to get read the ESR on a cap in a
hot circuit. Wonder if anyone has made a repair on a smoked Bob Parker
ESR meter. Any help would be appreciated.

Thanks in advanced.

Everett Cotton

[email protected]

AFAIR the literature that came with mine or possibly on the website states
that this usually takes out the micro.

Advice is also given to add a pair of inverse parallel rectifier diodes
across the terminals to prevent this kind of mishap.
 
J

John Bachman

Jan 1, 1970
0
Bob usually reads this group, so he may be able to tell you himself !!
Something about this group annoyed Bob so he does not hang out here
much anymore.

He has lots of helpful repair info on his site but I seemed to have
lost track of his URL. Shame on me. Anyone got it?

John
AnaTek Corporation
The electronic repair center at www.anatekcorp.com
 
A

Arfa Daily

Jan 1, 1970
0
John Bachman said:
Something about this group annoyed Bob so he does not hang out here
much anymore.

He has lots of helpful repair info on his site but I seemed to have
lost track of his URL. Shame on me. Anyone got it?

John
AnaTek Corporation
The electronic repair center at www.anatekcorp.com

He was on here just a coupla weeks ago ...

Arfa
 
I

ian field

Jan 1, 1970
0
John Bachman said:
Yeah, that was when he said that he does not read this group much
anymore.

John
AnaTek Corporation
Best prices on test equipment
www.anatekcorp.com/testequipment/meters.htm

Bob Parker is currently participating in a thread on ,
subject line: DSE ESR meter started 08/02/2007 he posted as recently as
today (13/02/2007).
 
J

John Robertson

Jan 1, 1970
0
I wasn't paying attention an tried to get read the ESR on a cap in a
hot circuit. Wonder if anyone has made a repair on a smoked Bob Parker
ESR meter. Any help would be appreciated.

Thanks in advanced.

Everett Cotton

[email protected]

I stock the replacement CPU for this meter, also spare circuit boards,
etc. Did you buy the kit from us?

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."
 
Q

quietguy

Jan 1, 1970
0
You will find Bob on the aus.electronics newsgroup

David
 
J

John Robertson

Jan 1, 1970
0
You will find Bob on the aus.electronics newsgroup

David

http://members.ozemail.com.au/~bobpar/esrprob.htm

That is the link for Bob's suggestions on fixing the ESR meter.

If you bought the kit from John's Jukes/Flippers.com please contact us
first for support after going through Bob's support page. We support
what we sell!

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's
Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
(604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com "Old pinballers never die, they
just flip out."
 
Top