Maker Pro
Maker Pro

Books and 'hands-on' design resources

Dear all,

Grateful for advises on books, recommended part numbers (bipolar
transistor, JFET, MOS-FET, OP-AMP), application notes or other hands-on
design resources for a very low noise pre-amp for ultrasonic sensor.

Input 0.01mV, pizeoelectronic sensor (high impdenece, mega ohm)
Output about 3 volts for driving 8 to 10 bits AD converter
Freq 1 kHz to 20KHz with reasonably flat response

Many thanks in advance