Maker Pro
Maker Pro

Bootloader for the PIC solder test PCB


Oct 29, 2010
Oct 29, 2010
Hello guys, I am doing a project on 'boot loader for the PIC soder test PCB'.
Could anyone solve my questions please...

Well, I need to write a boot loader code for PIC18F1320 and then need to transfer a PIC program into it which should be implemented using boot loader.

1. In general, which language we have to use for writing bootloader code and which format does the PIC support?
2. I found some bootloader codes with .h, .s, .exe, .bin, .bib extensions? wat r all these?
3. What are the possible ways to transfer a bootloader code into PIC?
4. Why do we use hyperterminal? I mean is it to transfer the bootloader code or user program?
5. If we need to run two applications using boot loader, what they could be?
6. How to reprogram if there is any error in the user code or boot loader code?