Maker Pro
Maker Pro

Bright White LEDs that are Static Sensitive!!!

B

Brad Petria

Jan 1, 1970
0
Hi,
Once I ordered some bright white LEDs from Jameco, which
were not static sensitive (no warning notice). I ordered another
type, N-94C6256, from another source and they came in a static
shielding bag with a warning!!!!! There is no information about
these. Why are these LEDs static sensitive?

Thanks in advance, Brad

Tip for your old computer (reduce discard pollution too):

If you can't sell your old computer, don't throw it away. Use it to backup
your software by transferring files/folders from your new computer or laptop
to it. I transferred my Windows folder and other stuff to my old computer
using "PC Link", which I downloaded from www.simtel.net (cool site).

http://www.simtel.net/pub/pd/52792.html (info or download)
 
J

Jim Yanik

Jan 1, 1970
0
[email protected] (Brad Petria) wrote in
Hi,
Once I ordered some bright white LEDs from Jameco, which
were not static sensitive (no warning notice). I ordered another
type, N-94C6256, from another source and they came in a static
shielding bag with a warning!!!!! There is no information about
these. Why are these LEDs static sensitive?

Thanks in advance, Brad

Actually,LED's being semiconductor devices,they SHOULD be shipped in anti-
static packaging. They're no different than any other diode.

Think about -how- static discharge damages semiconductor junctions.
Or recall the model for static discharge;the voltage and joules contained
in a single spike.
 
J

Jim shedden

Jan 1, 1970
0
Once I ordered some bright white LEDs from Jameco, which
were not static sensitive (no warning notice). I ordered another
type, N-94C6256, from another source and they came in a static
shielding bag with a warning!!!!!

Hi Brad,

It is best to treat all semiconductors as static sensitive and it's a
good habit to form. I work for a government contractor and we can't go
near anything without following static preventative procedures that we
are tested and certified on yearly. At home I can't be quite as
aggressive about it. I'm not going to install special flooring or wear
a smock, but I do use a wrist strap, anti-static mat, and anti-static
soldering and desoldering tools.

Regards,
Jim
 
A

Andre

Jan 1, 1970
0
Hi Brad,

It is best to treat all semiconductors as static sensitive and it's a
good habit to form. I work for a government contractor and we can't go
near anything without following static preventative procedures that we
are tested and certified on yearly. At home I can't be quite as
aggressive about it. I'm not going to install special flooring or wear
a smock, but I do use a wrist strap, anti-static mat, and anti-static
soldering and desoldering tools.

Yup, I had a few white LEDs get toasted for no apparent reason.
 
J

Jim Yanik

Jan 1, 1970
0
[email protected] (Brad Petria) wrote in
Hi,
Once I ordered some bright white LEDs from Jameco, which
were not static sensitive (no warning notice). I ordered another
type, N-94C6256, from another source and they came in a static
shielding bag with a warning!!!!! There is no information about
these. Why are these LEDs static sensitive?

Thanks in advance, Brad

Because they are semiconductor devices;they have a junction that can be
damaged by overvoltage just like any other diode.

FYI,static charges can vary from 30 volts to several *thousand* volts,with
high instantaneous currents.That's how they destroy semis.

LEDs are just diodes with low reverse breakdown V.

Static discharges can weaken semis,and cause failure days,months
later,too,not just immediately.
 
Top