Maker Pro
Maker Pro

brown-out condition


Soon Heng

Jan 1, 1970
Dear all,

There is a specification on FM1808 FRAM chip that "Anytime that the power to
the device (VDD) drops below 4.0V, the power supply must be taken to 0volts
(+/-0.1V) for a minimum of 1us before power is restored to the device. It is
recommended that the VDD pin be actively to ground through a low impedance
path to ensure reliable power-up operation".

Please advise on simple circuitry/components recommendation. Thanks!

Best Regards,

Soon Heng