Maker Pro
Maker Pro

Buck/Boost circuit for DC/DC conversion.

wdancer

Mar 12, 2010
18
Joined
Mar 12, 2010
Messages
18
I am looking to build a Buck/Boost DC/DC convertor for a car mounted base station. Several of my modules cannot handle more than 12VDC and ranges drop when the voltage drops. I want to keep a stable voltage even if my battery has to be run down below 10VDC (as in the battery pack is disconnected from the vehicle to make a stationary base station)

I know there has to be an IC or module out the that does this, but I am having a hard time finding it.
 
Top