Maker Pro
Maker Pro

Burnt Component Help Identify

MikeyTX

Feb 2, 2023
4
Joined
Feb 2, 2023
Messages
4
Can some one Please help me identify this burnt item. Thank you
 

Attachments

  • 20230208_190556.jpg
    20230208_190556.jpg
    676.7 KB · Views: 9

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,725
Joined
Nov 17, 2011
Messages
13,725
Can't see which one you mean. Zoom in closer and mark the component, please.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Judging by other parts on the board I'd say it was an electrolytic capacitor same as the ones marked 10/201 (200uF 10V) - the fault looks to be as a result of reverse power applied - maybe the ribbon was inserted the wrong way around? Either way I reckon your problem may well be a lot more than just that knackered capacitor......
 
Top