Prototyper-Brian
- Sep 12, 2014
- 7
- Joined
- Sep 12, 2014
- Messages
- 7
Hello Everyone,
I have a benchtop injection molding machine and I keep burning relay switches. This is what I can tell you, the fuses are not blowing but one of the pins melts and causes trouble in the machine. Any ideas of what would cause a burnt pin. I can send you pictures, I believe these are timer relays as well.
I have a benchtop injection molding machine and I keep burning relay switches. This is what I can tell you, the fuses are not blowing but one of the pins melts and causes trouble in the machine. Any ideas of what would cause a burnt pin. I can send you pictures, I believe these are timer relays as well.