Maker Pro
Maker Pro

button on/off

tom356

Feb 15, 2013
2
Joined
Feb 15, 2013
Messages
2
Hi

I been searching for days for a on/off button stands alone in a case..
I have attached a picture of a sample it dont have to be the same just
a button that will you can just hook up wires to in its own box..
Like a door bell box button, but push on/off
If anyone know were i can get them please leave a link..



thank you ,,tom
 

Attachments

  • button2.png
    button2.png
    81.7 KB · Views: 161
  • button.png
    button.png
    59.5 KB · Views: 111

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
do you want just a switch?
you say its push on/off does that mean you push once to turn on then push again to turn off?
is this for foot or hand?
for push on push off try these
http://www.jaycar.com.au/productView.asp?ID=SP0718
http://www.jaycar.com.au/productView.asp?ID=SP0656
for foot switch try this push on push off
http://www.jaycar.com.au/productView.asp?ID=SP0764

for momentary
http://www.jaycar.com.au/productView.asp?ID=SP0716

if youwant these already n boxes you could find them or you could spend 20 minutes and make a box yourself saving a bit of cash.
it all depends on the voltage, current and size you are looking for
 

KrisBlueNZ

Sadly passed away in 2015
Nov 28, 2011
8,393
Joined
Nov 28, 2011
Messages
8,393
It would be helpful if you told us where you're located. There's an option for this in your profile settings and it's there for a reason.

As donkey says, you need to describe what you want. You can get push-on/push-off and momentary (ON while button is held in); both types are readily available from electronic component suppliers and you can build them into an old pill container or similar. Many suppliers have prepackaged ones as well.
 
Top