Maker Pro
Maker Pro

Cadence Virtuoso. Warning Parameter 'lxUseCell' already exists.

Nilani_2

Feb 10, 2023
3
Joined
Feb 10, 2023
Messages
3
When I designed a schematic diagram, I received the below messages in cadence virtuoso.

*WARNING* Parameter 'lxUseCell' already exists.

*WARNING* cdfAppendParamFields: formInitProc must be a procedure: 'SetFetDefaultsCB'.

Could you tell me how to resolve these errors?
 

Delta Prime

Jul 29, 2020
1,914
Joined
Jul 29, 2020
Messages
1,914
Hello there welcome to maker pro.
I cannot see how without providing your code.
You must provide all pertinent information when asking for help.thank you. .
You're very lucky my crystal ball is working.
I hope this helps.

Example!

*WARNING* Parameter 'lxUseCell' already exists.
End netlist: Nov 7 19:12:42 2013

Moving original netlist to extNetlist
Removing parasitic components from netlist
presistors removed: 0
pcapacitors removed: 8
pinductors removed: 0
pdiodes removed: 0
trans lines removed: 0
6 nodes merged into 6 nodes

Excellent resource Bellow.

https://github.com/DavidZemon/CadenceProject/blob/master/project/nor/LVS/si.log
 
Last edited:

Nilani_2

Feb 10, 2023
3
Joined
Feb 10, 2023
Messages
3
Hello there welcome to maker pro.
I cannot see how without providing your code.
You must provide all pertinent information when asking for help.thank you. .
You're very lucky my crystal ball is working.
I hope this helps.

Example!

*WARNING* Parameter 'lxUseCell' already exists.
End netlist: Nov 7 19:12:42 2013

Moving original netlist to extNetlist
Removing parasitic components from netlist
presistors removed: 0
pcapacitors removed: 8
pinductors removed: 0
pdiodes removed: 0
trans lines removed: 0
6 nodes merged into 6 nodes

Excellent resource Bellow.

https://github.com/DavidZemon/CadenceProject/blob/master/project/nor/LVS/si.log
Thank you for your guidelines.
 
Top