Maker Pro
Maker Pro

Calibrating GOS522B Scope

Devnode

Jul 13, 2015
94
Joined
Jul 13, 2015
Messages
94
Hi, everyone. I got me a 2nd hand scope that seem well taken care of. At least from ny meagre knowledge of scopes. Its in the original box with manual included. So i try to calibrate it exactly as the manual suggests it. But i dont know where te connect the -ve clip on the probe. Ive attached a pic of the 2v p - p signal. It does not seem right to me. Can anyone shed some light here, please.
 

Attachments

  • WP_20161023_12_07_12_Pro.jpg
    WP_20161023_12_07_12_Pro.jpg
    121.7 KB · Views: 103
Last edited:

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Looks ok to me.

There may be some trace rotation, and without knowing the vertical settings and details about the probe, it's hard to say if the trace is right.

There is no need to connect the ground clip because the signal source shares the same ground as the rest of the oscilloscope
 

Devnode

Jul 13, 2015
94
Joined
Jul 13, 2015
Messages
94
Hi
Looks ok to me.

There may be some trace rotation, and without knowing the vertical settings and details about the probe, it's hard to say if the trace is right.

There is no need to connect the ground clip because the signal source shares the same ground as the rest of the oscilloscope
Hi, Steve. Thankyou so much for replying so quickly. I appreciate it very much. I can now jump right in and explore this with peace of mind. You are a true pillar on this forum. Have an awesome day!
 
Top