Calibrating GOS522B Scope

[Devnode]

Hi, everyone. I got me a 2nd hand scope that seem well taken care of. At least from ny meagre knowledge of scopes. Its in the original box with manual included. So i try to calibrate it exactly as the manual suggests it. But i dont know where te connect the -ve clip on the probe. Ive attached a pic of the 2v p - p signal. It does not seem right to me. Can anyone shed some light here, please.

 

[(*steve*)]

Looks ok to me.

There may be some trace rotation, and without knowing the vertical settings and details about the probe, it's hard to say if the trace is right.

There is no need to connect the ground clip because the signal source shares the same ground as the rest of the oscilloscope

 

[Devnode]

Hi

Looks ok to me.

There may be some trace rotation, and without knowing the vertical settings and details about the probe, it's hard to say if the trace is right.

There is no need to connect the ground clip because the signal source shares the same ground as the rest of the oscilloscope

Hi, Steve. Thankyou so much for replying so quickly. I appreciate it very much. I can now jump right in and explore this with peace of mind. You are a true pillar on this forum. Have an awesome day!