Maker Pro
Maker Pro

CAMA-AFM31 USB Capacitive Fingerprint Module with FPC1020 pin configuration

akash1996

Apr 19, 2017
1
Joined
Apr 19, 2017
Messages
1
I have a CAMA-AFM31 USB Capacitive Fingerprint Module with FPC1020. I am new to it and i cannot figure out what its pin configuration is. I have searched everywhere but am unable not find its datasheet. I just need to figure out its power, ground and tx/rx pins.
Please can someone provide me with some help? I have attached the necessary pictures of the module.
Thanks in advance.
IMG_20170409_181110_1@1x.jpg FPC1020-fingerprint-sensor.png
 
Top