I've been working in this whole night but an error still occur during the simulation
Note: can't find init file.
*****************************************************************
WinSpice © Copyright 1996-2003 OuseTech Ltd. All Rights Reserved.
Version: 1.05.07
Built : Dec 18 2004 01:27:23
Shareware version of WinSpice. For non-commercial use only.
Please read the file 'license.txt' for conditions of use.
*****************************************************************
WinSpice 1 -> cd
Current directory: D:\Instaler\Basic Lab VLSI Design\Exercises\Exercise 5
WinSpice 2 -> source "A(B+C)_invert.cir"
Reading .\A(B+C)_invert.cir
NOTE: This is a Spice2 circuit file
Spice3 commands added:-
.control
destroy all
set units=degrees
save Vc 0 Vb Va
tran 5p 500n 0 5p
print v(Vc) v(0) v(Vb) v(Va)
plot v(Vc) v(0) v(Vb) v(Va)
.endc
Circuit: *** FACET a(b+c)_invest_sch_tst FROM LIBRARY A(B+C)_invert ***
Error: unknown subckt: xnode15 vdd va vc 0 vb a(b+c)_invert
i hope someone could help me in this
Note: can't find init file.
*****************************************************************
WinSpice © Copyright 1996-2003 OuseTech Ltd. All Rights Reserved.
Version: 1.05.07
Built : Dec 18 2004 01:27:23
Shareware version of WinSpice. For non-commercial use only.
Please read the file 'license.txt' for conditions of use.
*****************************************************************
WinSpice 1 -> cd
Current directory: D:\Instaler\Basic Lab VLSI Design\Exercises\Exercise 5
WinSpice 2 -> source "A(B+C)_invert.cir"
Reading .\A(B+C)_invert.cir
NOTE: This is a Spice2 circuit file
Spice3 commands added:-
.control
destroy all
set units=degrees
save Vc 0 Vb Va
tran 5p 500n 0 5p
print v(Vc) v(0) v(Vb) v(Va)
plot v(Vc) v(0) v(Vb) v(Va)
.endc
Circuit: *** FACET a(b+c)_invest_sch_tst FROM LIBRARY A(B+C)_invert ***
Error: unknown subckt: xnode15 vdd va vc 0 vb a(b+c)_invert
i hope someone could help me in this