Maker Pro
Maker Pro

Can anyone identify these components? They are SMD

Michael Little

Aug 30, 2015
4
Joined
Aug 30, 2015
Messages
4
I cannot identify what these are. They are SMD. The second one is a horrible photo because they are so small. I have a multi meter so maybe there is a way I can identify myself? Any help is appreciated.unknown1.jpg unknown2.jpg
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
A sharp image of them would help. In our resources section we have some hints for getting better photos.
 

newjeeper369

Aug 30, 2015
25
Joined
Aug 30, 2015
Messages
25
possibly a ceramic surface mount fuse??? is the component in a type of clip you can remove it from? need better picture.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
what is the resistance? It may be an inductor.
 

Michael Little

Aug 30, 2015
4
Joined
Aug 30, 2015
Messages
4
Ah, inductor makes sense since one side goes to an antenna and the other a transmitter. That is probably it. I'll check the resistance
 

davenn

Moderator
Sep 5, 2009
14,039
Joined
Sep 5, 2009
Messages
14,039
its pretty much going to be zero resistance, there's only a few turns of wire
 

73's de Edd

Aug 21, 2015
3,365
Joined
Aug 21, 2015
Messages
3,365
It also reminds me of a SM profile of Wee-inductor.
Additionally, subject the unit to a neodymium-yum-yum-yum magnet placed atop it, and see if there is being any "pull" to a core material.

73's de Edd
 
Top