Maker Pro
Maker Pro

can anyone suggest a low voltage plug solution for our sculpture project?

infraredmosquito

Sep 18, 2011
1
Joined
Sep 18, 2011
Messages
1
I am trying to find some sort of plug solution for our low voltage sculpture projects. each sculpture has a red and black wire, to match the 12volt power source
we want to be able to plug each one in when we set them up, rather than wire them altogether



bullet connectors and disconnects always yank the wire right out of the crimp because they are so hard to pull back apart
we want about 100, so we are hoping for something under .25 each


we were using rca jack plugs, which in one way worked great, the bad thing is how they put the hot wire wrapped inside the grounding wire. its a pain to separate the wires
can't believe no one else wants some sort of small low voltage plugs
just two wire
without soldering

thinking of trying tamiya
any suggestions?
 

KJ6EAD

Aug 13, 2011
1,114
Joined
Aug 13, 2011
Messages
1,114
You've created an impossible specification. You can have it good, fast or cheap but not all three.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Anderson connectors from powerx are ideal DC power connectors for your situation

and at an affordable price in bulk

cheers
Dave
 
Top