Maker Pro
Maker Pro

Can i Erase last digit on the LCD screen? *I am a total newbie*

yomastoz

Feb 9, 2016
5
Joined
Feb 9, 2016
Messages
5
Hi!

I kinda don't know how this closc works, but i have some ideas.
The question is, how can i erase the last minute digit (That it won't be shown on display ever again).
IMG_9988.JPG


IMG_9991.JPG

IMG_9990.JPG
 

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
Simplest solution, non destructive and reversible:
Put a sticker on it...;)
 
Last edited by a moderator:

yomastoz

Feb 9, 2016
5
Joined
Feb 9, 2016
Messages
5
I wanted to do it, i want it to remain number 1 all the time, so i thought if i could erase it an then add number 1 sticker on it.
If i do it while it is still working, then there is no point. :)
 
Last edited by a moderator:

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
I wanted to do it, i want it to remain number 1 all the time, so i thought if i could erase it an then add number 1 sticker on it.
If i do it while it is still working, then there is no point. :)

that didn't really make sense

you have better explain more clearly what you are trying to achieve and why
 

Gryd3

Jun 25, 2014
4,098
Joined
Jun 25, 2014
Messages
4,098
4 x 7 Segments.
Are there any other symbols or items on the screen that turn on?
You do realize this uses hardly any current and should just be left alone.

Best case, you cut one wire to disable that position... worst case, you cut the wrong one and the whole thing dies or one of the 7 segments on EACH one of the positions will no longer work.
 
Top