Maker Pro
Maker Pro

Can some ID this component for me ? Thanks

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Diode - quite probably a zener rated at 15V and 1.3W. Need to see more of the board to confirm.
 

gafthehorse

Apr 28, 2022
2
Joined
Apr 28, 2022
Messages
2
Diode - quite probably a zener rated at 15V and 1.3W. Need to see more of the board to confirm.
Many Thanks, on the actual board this component is a bit of a charred mess, the picture displayed was from the equipment supplier (they didn't make the boards, they bought them in) and they didn't know what it was. It is in the power smoothing section of the PCB so I will go with your assessment and see if a replacement does the trick....once again, thanks
 
Top