Maker Pro
Maker Pro

Can somebody help how to get desired coil inductance

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
Welcome to EP.
Here you have a guide and calculator (there are many others on the web).
You can also buy ready made standard coils.
 

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
An example:

iron core, μ=100
diameter 1 cm
length 10 cm
No of trurns=100

You get 0.99mH (put the values in the calc. and check).
Note:
1. the wire is 10/100=1mm thick.
2. you can play with the diameter,length and turns to get the same results in other sizes.
 

michael1978

Mar 17, 2012
388
Joined
Mar 17, 2012
Messages
388
An example:

iron core, μ=100
diameter 1 cm
length 10 cm
No of trurns=100

You get 0.99mH (put the values in the calc. and check).
Note:
1. the wire is 10/100=1mm thick.
2. you can play with the diameter,length and turns to get the same results in other sizes.
thanks a lot...
 
Top