Maker Pro
Maker Pro

Can't find datasheet for PW204I

Jordy

Mar 22, 2017
1
Joined
Mar 22, 2017
Messages
1
So I scrapped this device and in there was a verry nice power supply, with multiple diffrent output currents. So I wanted to look the datasheet up because I am not really sure wich connector is ground etc. but all I can find is a chinese site with a couple thousend lines of text. can anyone help me??

Model: PW204I
REV: 1
INSUNG ELECTRONICS
 

ramussons

Jun 10, 2014
462
Joined
Jun 10, 2014
Messages
462
So I scrapped this device and in there was a verry nice power supply, with multiple diffrent output currents. So I wanted to look the datasheet up because I am not really sure wich connector is ground etc. but all I can find is a chinese site with a couple thousend lines of text. can anyone help me??

Model: PW204I
REV: 1
INSUNG ELECTRONICS

Perhaps, you mean output voltages. If the unit is working, why not measure the voltages at the outputs? Check for continuity between the terminals. If there are many, we can presume that that is "Ground". If there is no common connectivity, then presume that the outputs are floating.
A few photos will be very helpful in better help.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
So I wanted to look the datasheet up because I am not really sure wich connector is ground etc.

just to ensure you saw ramussons comment ......
show us a photo of the output area
 
Top