swenmasterson
- Sep 29, 2013
- 13
- Joined
- Sep 29, 2013
- Messages
- 13
Hi everyone,
I am converting an N64 controller - Switching the original joystick for a joystick salvaged from a 3rd party controller. Everything is wired up correctly according to a manual of the mod's creator, however the project doesnt work.
I suspect the pots, I have no idea if I have the right pinout for them. How could I find this out for sure? The pinout that I drew is the pinout that I believe is correct, however I am not sure. Black wire is GND, red VCC, blue and red is signal. Please find photos below:
http://imgur.com/a/MllpO
Thanks for all input
I am converting an N64 controller - Switching the original joystick for a joystick salvaged from a 3rd party controller. Everything is wired up correctly according to a manual of the mod's creator, however the project doesnt work.
I suspect the pots, I have no idea if I have the right pinout for them. How could I find this out for sure? The pinout that I drew is the pinout that I believe is correct, however I am not sure. Black wire is GND, red VCC, blue and red is signal. Please find photos below:
http://imgur.com/a/MllpO
Thanks for all input