Maker Pro
Maker Pro

Can't understand this schematic .. please help.

vari21

Apr 15, 2020
16
Joined
Apr 15, 2020
Messages
16
Hello ,
I dont know if im posting in the right section or not.
im thinking to build an eprom programmer from scratch,so i went to google ,and found this one, i ve already uploaded the shematic of the programmer.
the problem is im a bit confused about wiring connections between chips for example is U4A pins 3/4/5/6 are connected with U5A 3/4/5/6 ?? and how are connected to zif28 which poins go to zif28 , same thing about U6 U7 which pins are connected to zif28??
same thing U8 A4 A5 A6 A7 are all shunted togheter??? realy confused sorry about my english and thanks for help.
 

Attachments

  • 6502.png
    6502.png
    294.9 KB · Views: 15

bertus

Moderator
Nov 8, 2019
3,382
Joined
Nov 8, 2019
Messages
3,382
Hello,

The schematic uses a bus structure to avoid a lot of lines on the schematic.
In the schematic I made some remarks:
vari21_6502_a0.png
Bertus
 
Top