Maker Pro
Maker Pro

Capacitance Meter Kit ???

J

Jim Simmons

Jan 1, 1970
0
Looking for any kind of information about a kit constructed printed circuit
board with the following info on it DAGE CM-334. very well made design.
Circuit board mounts everything except power supply and is mounted using
the select switch and the zero adjust. Kit is very well made excellent
components. Has a older 3 digit readout in the upper left section of the
board, the zero adjust is in the upper right, and just below it is the
selection switch. Selection switch position are; OFF, mF, and uF.

Thanks!

Jim
 
J

Julie

Jan 1, 1970
0
Jim said:
Looking for any kind of information about a kit constructed printed circuit
board with the following info on it DAGE CM-334. very well made design.
Circuit board mounts everything except power supply and is mounted using
the select switch and the zero adjust. Kit is very well made excellent
components. Has a older 3 digit readout in the upper left section of the
board, the zero adjust is in the upper right, and just below it is the
selection switch. Selection switch position are; OFF, mF, and uF.

Thanks!

Jim

Maybe this?

http://www.flippers.com/esrktmtr.html
 
Top