Maker Pro
Maker Pro

Capacitor charging power supply( ccps)

Hafeez28

Jan 30, 2022
1
Joined
Jan 30, 2022
Messages
1
Hi, I am trying to fix ccps, it drops voltage on load. it have 2 out put,24volt and 1200volt. However 1200volt is not fixed, it depends on command. I mean we can give command UpTo 1200volt maximum to charge capacitor bank.
Normally it work well but when I give command to charge capacitor bank UpTo 100vdc it even drop its other 24volt too. But If I give command less than 50vdc it remain ok. Plz help
 
Top