Maker Pro
Maker Pro

Capacitor Help Needed....Picture Link Included

D

Deejay

Jan 1, 1970
0
Can someone please help me identify the capacitor in the link below? I
don't really understand the writing on the capacitor so I'm having a
super hard time trying to find a replacement. All I know is that it is
not working and I need to solder a new one back on to the device in
which I took it off to get it to work again. Please help....thanks.

http://home.pacbell.net/deejay27/capacitor_pic.jpg
 
R

Ray L. Volts

Jan 1, 1970
0
Deejay said:
Can someone please help me identify the capacitor in the link below? I
don't really understand the writing on the capacitor so I'm having a
super hard time trying to find a replacement. All I know is that it is
not working and I need to solder a new one back on to the device in
which I took it off to get it to work again. Please help....thanks.

http://home.pacbell.net/deejay27/capacitor_pic.jpg

Metallized polyester film
..1 microfarad
10% tolerance (K)
630 Volt rated

MKT polys are typically higher-temp, higher-accuracy than the garden variety
"green caps"; they're commonly found in high-end audio..
 
R

Ross Herbert

Jan 1, 1970
0
Can someone please help me identify the capacitor in the link below? I
don't really understand the writing on the capacitor so I'm having a
super hard time trying to find a replacement. All I know is that it is
not working and I need to solder a new one back on to the device in
which I took it off to get it to work again. Please help....thanks.

http://home.pacbell.net/deejay27/capacitor_pic.jpg

You didn't leave the pic there for long did you? If you got the answer
you were after then post a reply saying so and that you are removing
the link.
 
Top