Maker Pro
Maker Pro

Capacitor type comparison

tedstruk

Jan 7, 2012
476
Joined
Jan 7, 2012
Messages
476
I have some bulged caps from a motherboard out of a HP pavilion, They are polarized 10x25 3300uf 6.3v 105 degree caps. nichicon HO149 HM(M). I have found type HW(M) and a slew of others, but on HM(M)and I can't find a datasheet on any of them. whats the difference between a
MBZ T0610 and a HM(M)H0149
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Please provide links to the datasheets you have found and at least one image of one of the unknown caps.
 

HellasTechn

Apr 14, 2013
1,579
Joined
Apr 14, 2013
Messages
1,579
Dear friend, i beleave you are looking for a needle in a haystack here... With a good brand capacitor, As long as you maintain the same capacitance and voltage rating you should be fine.
 

tedstruk

Jan 7, 2012
476
Joined
Jan 7, 2012
Messages
476
Dear friend, i beleave you are looking for a needle in a haystack here... With a good brand capacitor, As long as you maintain the same capacitance and voltage rating you should be fine.
I found a complete database on the nichicon site, but I had to chance inputting the URL because the database was for alias ***. nichicon.com.database/e-pw.pdf where pw.pdf was the model of the cap. I manually put in HM and got the specs. The HW's are higher quality of the same specs, except for one thing... the impedance in the table of the HM says and I quote '12'.... I don't think that's right, and the HW's impedance was . 030 to .070 I hope the HW's work.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Without units those numbers are useless. 0.030 something's is way less than 12 something's, but more than 12 mili-somethings.
 
Top