Maker Pro
Maker Pro

Cases chasms and crooks.

roughshawd

Jul 13, 2020
470
Joined
Jul 13, 2020
Messages
470
1. A PSU case adapted to cool an amplifier...
2. I need a solution for butt connecting...
3. The secret here is obviously being able to move things so they will fit...
 

Attachments

  • 17019930470498002878643160298898.jpg
    17019930470498002878643160298898.jpg
    216.5 KB · Views: 12

Delta Prime

Jul 29, 2020
2,042
Joined
Jul 29, 2020
Messages
2,042
6
I need a solution for butt connecting..The secret here is obviously being able to move things so they will fit...
You have answered your own question.
Anatomically speaking...
one is an output.
Use your imagination for the input.
 

roughshawd

Jul 13, 2020
470
Joined
Jul 13, 2020
Messages
470
My simple fix with a bit In manufacturing accessories port, probably for the fix I did. Notice the manufacturer port, and the case vent that requires the consumer fix...
 

Attachments

  • 17020570234723688686509276583528.jpg
    17020570234723688686509276583528.jpg
    197.5 KB · Views: 5
  • 17020570426103160061153963437461.jpg
    17020570426103160061153963437461.jpg
    199.4 KB · Views: 5
  • 17020570881935130234475755536434.jpg
    17020570881935130234475755536434.jpg
    152.5 KB · Views: 5
  • 17020571372921099047742544714579.jpg
    17020571372921099047742544714579.jpg
    204.8 KB · Views: 5

Martaine2005

May 12, 2015
4,956
Joined
May 12, 2015
Messages
4,956
I have absolutely no idea what you are doing.
But I have questions for you.
1. Does the amp overheat?
2. Does it have an internal cooling fan?
3. Have you checked heat sink paste on output transistors?
4. WHAT ARE YOU DOING?
 

roughshawd

Jul 13, 2020
470
Joined
Jul 13, 2020
Messages
470
The amp is one of those fantastic ideas but was too expensive to complete properly. They added a female plug in for the fan, and expected everyone to add it. The amp used to get hot and snap off in the middle of a movie. Now it is working properly, and the glitches it used to have are gone. Using a fan to draw the heat through the vent holes, keeps the case cool, and even though it has a high power fan that works in high power conditions, built into the amp case, the low power states I usually use, never turned it on. The fan I added does a great job, and I don't even think about it during movies anymore...!!!
 

roughshawd

Jul 13, 2020
470
Joined
Jul 13, 2020
Messages
470
So also, after building a regular wall wart powered 12 case fan, my old vintage is quiet, performs like a champ, and works just fine. The new style fan is a whirring nightmarish buzz generally blowing lots and lots of air, rather than exhausting the heat from the vent... Just saying, most pc fans suck air in rather than exhausting heat out...
 
Top