Hello all,
I was wondering if this is possible. I have a 12V DC motor and an RF 2-Channel Wireless Remote Control Relay Switch Module. I was hoping that I could use the relay switch to control the direction of the motor. I also will have an upper and lower limit switch that will be in play. Unfortunately, my lack of experience is causing some issues.
I have the follow terminals available on the relay:
+ (receiver power)
- (receiver power)
NO1
NC1
COM1
NO2
NC2
COM2
Can someone let me know if this is possible with the hardware I have and, if so, an idea of how to wire it? I've included a PDF of the existing hardware.
Thanks in advance!
I was wondering if this is possible. I have a 12V DC motor and an RF 2-Channel Wireless Remote Control Relay Switch Module. I was hoping that I could use the relay switch to control the direction of the motor. I also will have an upper and lower limit switch that will be in play. Unfortunately, my lack of experience is causing some issues.
I have the follow terminals available on the relay:
+ (receiver power)
- (receiver power)
NO1
NC1
COM1
NO2
NC2
COM2
Can someone let me know if this is possible with the hardware I have and, if so, an idea of how to wire it? I've included a PDF of the existing hardware.
Thanks in advance!
Attachments
Last edited: