Chrissi1001
- Aug 26, 2019
- 2
- Joined
- Aug 26, 2019
- Messages
- 2
Hello,
before I ask my actual question, let me give you some background information:
I have multiple LED lights in my room that are all controlled differently. Most of them have a simple power switch on them but one came with a 2.4G remote control which appears to support controlling up to 4 groups of LEDs. Now I would like to replace the LED drivers of my other lights with the same 2.4G driver so that I can control every light in my room with the same remote control.
I already found the manufacturer of the 2.4G LED driver and I am currently thinking of buying some "samples" from them for my little project. Here is a link: https://www.alibaba.com/product-detail/2-4G-Wireless-Remote-Control-Smart_62022399028.html
The main problem that cought my eye is that the 2.4G LED driver has an output of 30-43V / 350mA but obviously my lights currently have drivers with different outputs, for example one of them has 12V / 1.25A.
As you can probably already imagine my question is:
Is there any way how I can tranform the 30-43V / 350mA from the 2.4G driver into whatever I need for each of my lights? The only thing that all of the drivers have in common is that they are all 15W so the only thing that differs is the output current and voltage. Is there any pre-built circuit or one that I could make by myself that would allow me to do this?
I only have a very basic knowledge of this stuff and it has been quite a few years since the last time I did anything with electronics so I need some help here
Thanks a lot in advance!
before I ask my actual question, let me give you some background information:
I have multiple LED lights in my room that are all controlled differently. Most of them have a simple power switch on them but one came with a 2.4G remote control which appears to support controlling up to 4 groups of LEDs. Now I would like to replace the LED drivers of my other lights with the same 2.4G driver so that I can control every light in my room with the same remote control.
I already found the manufacturer of the 2.4G LED driver and I am currently thinking of buying some "samples" from them for my little project. Here is a link: https://www.alibaba.com/product-detail/2-4G-Wireless-Remote-Control-Smart_62022399028.html
The main problem that cought my eye is that the 2.4G LED driver has an output of 30-43V / 350mA but obviously my lights currently have drivers with different outputs, for example one of them has 12V / 1.25A.
As you can probably already imagine my question is:
Is there any way how I can tranform the 30-43V / 350mA from the 2.4G driver into whatever I need for each of my lights? The only thing that all of the drivers have in common is that they are all 15W so the only thing that differs is the output current and voltage. Is there any pre-built circuit or one that I could make by myself that would allow me to do this?
I only have a very basic knowledge of this stuff and it has been quite a few years since the last time I did anything with electronics so I need some help here
Thanks a lot in advance!