Maker Pro
Maker Pro

Change satellite dish mount

mrel

Jul 2, 2008
114
Joined
Jul 2, 2008
Messages
114
Hi
Got satellite ku band dish at yard sale see (enclosed picture) want to change the mount to Dishnetwork mount
The dish is measure 40 inch from top to bottom ,from left to right 36 inch.
anyone did any covert of they satellite dish did it work for you?
mrel IMG_20181006_155259.jpg IMG_20181006_155139.jpg IMG_20181008_181115.jpg IMG_20181006_155139.jpg IMG_20181006_155259.jpg IMG_20181008_181115.jpg
 

Bluejets

Oct 5, 2014
5,872
Joined
Oct 5, 2014
Messages
5,872
Hope you picked it up free......... :)

Single point mounts tend to move around.
I'd be inclined to go with a 3 point mounting type similar to what we use here.
Main support rotates up and down on the base and 2 rear support arms are telescopic and once dish is set, a zipper ( self drill) screw locks it in place.
 

Attachments

  • DishMount.jpg
    DishMount.jpg
    15.8 KB · Views: 9
  • Ku-Band.jpg
    Ku-Band.jpg
    8.6 KB · Views: 10

mrel

Jul 2, 2008
114
Joined
Jul 2, 2008
Messages
114
Hope you picked it up free......... :)

Single point mounts tend to move around.
I'd be inclined to go with a 3 point mounting type similar to what we use here.
Main support rotates up and down on the base and 2 rear support arms are telescopic and once dish is set, a zipper ( self drill) screw locks it in place.

Bluejet
You see the picture of dish and see picture of the mount how low should put the mount on the back of the dish.
see picture of the mount again.
mrel
 

Attachments

  • IMG_20181009_220833.jpg
    IMG_20181009_220833.jpg
    179 KB · Views: 7
Top