Maker Pro
Maker Pro

Cheap alternative to graphic LCD, OLED & TFT displays modules

ncgomes

Sep 13, 2014
1
Joined
Sep 13, 2014
Messages
1
Seeking a technology or even a manufacturer that could produce graphic display modules, with dimensions between 14'' and 19'', low-res, few colors, but definitely must have white background.

Anyone have any suggestions of manufacturer, or technology, or forum where I can find an answer?

Thank you very much. Best regards, Nuno.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
The most obvious question is "what interface do you require"?

Following that there are questions about power consumption etc.

You would likely find that the most cost-efficient method would be to use a standard panel, already produced in the gazzilions, and have an interface developed to allow it to emulate some lower resolution display.

It may even be easier for you to specify a DVI interface and do the generation of the signals yourself, and use an off-the-shelf computer monitor.
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Unless, of course, you want to buy 1,000,000 of them.

Bob
 
Top