Maker Pro
Maker Pro

Circuit Breaker connection question

bowiefan

Feb 25, 2015
3
Joined
Feb 25, 2015
Messages
3
I have a treadmill that has a simple single pole fuse holder type 15 amp circuit breaker mounted next to the on-off switch on the bottom of unit. When removing the breaker I didn't take note of the wiring. Its a simple two prong female spade connector breaker with reset and there is no indication for proper wire connection, just technical spec writing on one side. Can this breaker have the two wires reconnected either way?
 

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
Can you take a picture of the breaker and the wires?
Cheers
Adam
 

bowiefan

Feb 25, 2015
3
Joined
Feb 25, 2015
Messages
3

Attachments

  • DSCF1180.JPG
    DSCF1180.JPG
    67.9 KB · Views: 121
  • DSCF1181.JPG
    DSCF1181.JPG
    42.2 KB · Views: 105
  • DSCF1182.JPG
    DSCF1182.JPG
    186.7 KB · Views: 134
Top