blktoptrvl
- May 21, 2011
- 1
- Joined
- May 21, 2011
- Messages
- 1
Hello all.
I am not an electronics guy, nor do I wish to become one - meaning that I do not wish to learn electronics. I am just here to see if there is anyone who might be interested in designing and building a circuit and selling the result to me.
I am assuming it is a relatively simple circuit from what I have been able to read (but hey - what do I know), but I do not have the time to learn, design or build it. If anyone here can, and is interested, I would be happy to pay for the completed product.
The following is a description of what I need.
Wanted To Buy...
An Electronic device (and documentation thereof) with a circuit that will (at base state) pass 9 volts as long as the circuit is sensing vibrations. When the vibrations stop, the circuit will continue to pass 9 volts for x more minutes. However, if before the x minutes are expired, there is a new vibration sensed, the circuit will go back to the base state.
[In this writeup, x is variable between 5 and 30 minutes.]
The next time the motion is stopped, the timer will again begin at x minutes.
This device should be sensitive enough that the vibrations associated with walking down the street will keep the voltage flowing.
The device should use 16 guage wires to pass power and must fit within a 2.5" x 2.5" x .5" plastic box.
Once the time (x) expires, the circuit should draw 0 volts and will not draw any voltage again until a new vibration is sensed.
I will pay for the documentation of the circuit and the prototype as a matched set.
If anyone is interested in building this, please drop me a private message with a price.
Thanks.
BTW, if this message is outside of the tradition or protocol of this site, I mean no offense.
I am not an electronics guy, nor do I wish to become one - meaning that I do not wish to learn electronics. I am just here to see if there is anyone who might be interested in designing and building a circuit and selling the result to me.
I am assuming it is a relatively simple circuit from what I have been able to read (but hey - what do I know), but I do not have the time to learn, design or build it. If anyone here can, and is interested, I would be happy to pay for the completed product.
The following is a description of what I need.
Wanted To Buy...
An Electronic device (and documentation thereof) with a circuit that will (at base state) pass 9 volts as long as the circuit is sensing vibrations. When the vibrations stop, the circuit will continue to pass 9 volts for x more minutes. However, if before the x minutes are expired, there is a new vibration sensed, the circuit will go back to the base state.
[In this writeup, x is variable between 5 and 30 minutes.]
The next time the motion is stopped, the timer will again begin at x minutes.
This device should be sensitive enough that the vibrations associated with walking down the street will keep the voltage flowing.
The device should use 16 guage wires to pass power and must fit within a 2.5" x 2.5" x .5" plastic box.
Once the time (x) expires, the circuit should draw 0 volts and will not draw any voltage again until a new vibration is sensed.
I will pay for the documentation of the circuit and the prototype as a matched set.
If anyone is interested in building this, please drop me a private message with a price.
Thanks.
BTW, if this message is outside of the tradition or protocol of this site, I mean no offense.
Last edited: