Hi,
I recently had a thread where I asked for help deciding on a 3 axis CNC driver and eventually decided on the following driver:
http://www.ebay.ca/itm/CNC-3-Axis-C...n_0&hash=item27cbf29828&_uhb=1#ht_5133wt_1186
It works GREAT only 1 axis does not work... The Y axis. I am talking to the company and am hopefully getting a new driver. The only problem is that could take months and shipping last time took 4 weeks!!! In the mean time I am looking at getting a 1 axis driver for temporary use. The board has a 4th axis expansion port with 5 outputs: 5v, CK, CW, EN and GND Will these outputs work with this board:
http://www.ebay.com/itm/CNC-Router-...585?pt=LH_DefaultDomain_0&hash=item46089e01c1
I am on a tight time line so any help would be GREATLY appreciated.
Thanks
I recently had a thread where I asked for help deciding on a 3 axis CNC driver and eventually decided on the following driver:
http://www.ebay.ca/itm/CNC-3-Axis-C...n_0&hash=item27cbf29828&_uhb=1#ht_5133wt_1186
It works GREAT only 1 axis does not work... The Y axis. I am talking to the company and am hopefully getting a new driver. The only problem is that could take months and shipping last time took 4 weeks!!! In the mean time I am looking at getting a 1 axis driver for temporary use. The board has a 4th axis expansion port with 5 outputs: 5v, CK, CW, EN and GND Will these outputs work with this board:
http://www.ebay.com/itm/CNC-Router-...585?pt=LH_DefaultDomain_0&hash=item46089e01c1
I am on a tight time line so any help would be GREATLY appreciated.
Thanks
Last edited:
