Maker Pro
Maker Pro

Cold Fusion Reactor needs Power Supply Help !

O

Omicron

Jan 1, 1970
0
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the

instructions) , and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)


I am fairly adept with Electricity and Wiring,,,, and I am sure I
could wind a Transfomer, as long as I knew it was the right one, and
had some clear instruction.


I have been looking for ones to buy, but I dont know if one is the
right item, if I dont know what the other is to combine them
both.......


I would like to use 110V to begin with, even though I have 220V up to
440V available........


Does anyone know an economical way to render one of these, kit or
instructions availble somewhere ? So much jargon is so vague and
general, that it is not meant for the unexperienced.


thanks for your support
 
N

N Cook

Jan 1, 1970
0
Omicron said:
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the

instructions) , and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)


I am fairly adept with Electricity and Wiring,,,, and I am sure I
could wind a Transfomer, as long as I knew it was the right one, and
had some clear instruction.


I have been looking for ones to buy, but I dont know if one is the
right item, if I dont know what the other is to combine them
both.......


I would like to use 110V to begin with, even though I have 220V up to
440V available........


Does anyone know an economical way to render one of these, kit or
instructions availble somewhere ? So much jargon is so vague and
general, that it is not meant for the unexperienced.


thanks for your support

It may be easier going down this route to fision rather than fusion
http://www.dangerouslaboratories.org/radscout.html
 
S

St. John Smythe

Jan 1, 1970
0
Omicron said:
So much jargon is so vague and
general, that it is not meant for the unexperienced.

Yes...perhaps you should take a lesson from that.
 
F

Fred Bloggs

Jan 1, 1970
0
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the
instructions) , and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)


I am fairly adept with Electricity and Wiring,,,, and I am sure I
could wind a Transfomer, as long as I knew it was the right one, and
had some clear instruction.


I have been looking for ones to buy, but I dont know if one is the
right item, if I dont know what the other is to combine them
both.......


I would like to use 110V to begin with, even though I have 220V up to
440V available........


Does anyone know an economical way to render one of these, kit or
instructions availble somewhere ? So much jargon is so vague and
general, that it is not meant for the unexperienced.


thanks for your support

Your question makes absolutely no sense whatsoever- there is no
substitution "either or both" for variac and isolation transformer.
Re-post with the instructions verbatim and stop trying to redact
information you have no chance of understanding.
 
K

Ken Smith

Jan 1, 1970
0
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the
instructions)

160VDC suggests a DC power supply is what you want.
1KVA suggests an AC power source.

It could be that the instructions you have are hard to follow because they
are, quite simply, nonsense. Did you pay money for them?
 
D

Dr. Anton T. Squeegee

Jan 1, 1970
0
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the

instructions) , and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)

<snippage>

Think about what you're doing. You claim to be "fairly adept with
Electricity and Wiring," yet you don't know the difference between a
Variac and an isolation transformer, both of which are devices that any
first-year electronics hobbyist should know about.

Couple that with the fact that you're trying to put together a
device of questionable integrity (a cold-fusion reactor? Get real!) from
what sound like equally questionable instructions.

Sounds to me like you either got conned, or you're trying out for
the Darwin Awards. Perhaps both...?

I would like to use 110V to begin with, even though I have 220V up to
440V available........

OK, I'm leaning more towards 'Darwin Awards Candidate' after
seeing that.
So much jargon is so vague and general, that it is not meant for the unexperienced.

That's exactly right. If you value your time in this world, I
would strongly recommend that you become EXperienced, in terms of
college courses and labwork, before you go any farther.

Said experience should also save some stress on your pocketbook,
as the knowledge you gain will help prevent you from being further taken
in by those hucksters who prey on the electronics beginner.


--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?"
 
O

Omicron

Jan 1, 1970
0
I am merely repeating the instructions as have been given to me, by a
person who does not speak english. From a well accomplished project
that has numerous working models and videos !

I think the ones we should really be worried about is people who stalk
these news groups to prevert naive people looking for a little bit of
guidance and support. Any real Scientists, would be eager to help
people which is what these News Groups are supposed to be
about......... instead of prowling around and collecting websites,
about peoples misfortunes, (if not actually being responsible for
making them up) If there ever was anyone who offered their support,
things like that would have never happened in the first place, and
everyone would probably have Hydrogen Powered Homes and Vehicles years
ago and not be sucking exhaust pipes, or being witless victims of
societies dictation

I found the instructions and a kit (which is what I have been asking
for), for about 100$ ......... most of you people are only speculating
something you dont know jack shit about .............

as for the rest,,,,,, I also thank everyone here that has given their
support and make this group for what it is about ! thanks for your
encouragement
 
P

Pooh Bear

Jan 1, 1970
0
Omicron said:
I am merely repeating the instructions as have been given to me, by a
person who does not speak english. From a well accomplished project
that has numerous working models and videos !

I think the ones we should really be worried about is people who stalk
these news groups to prevert naive people looking for a little bit of
guidance and support. Any real Scientists, would be eager to help
people which is what these News Groups are supposed to be
about......... instead of prowling around and collecting websites,
about peoples misfortunes, (if not actually being responsible for
making them up) If there ever was anyone who offered their support,
things like that would have never happened in the first place, and
everyone would probably have Hydrogen Powered Homes and Vehicles years
ago and not be sucking exhaust pipes, or being witless victims of
societies dictation

I found the instructions and a kit (which is what I have been asking
for), for about 100$ ......... most of you people are only speculating
something you dont know jack shit about .............

as for the rest,,,,,, I also thank everyone here that has given their
support and make this group for what it is about ! thanks for your
encouragement

You're an idiot.

The hydrogen economy is a vacuous wate of time fuelled as it is by
hydrocarbon interests.

You don't know your left from your right and it shows.

Graham
 
D

Dr. Anton T. Squeegee

Jan 1, 1970
0
I am merely repeating the instructions as have been given to me, by a
person who does not speak english. From a well accomplished project
that has numerous working models and videos !

Uh huh. Sure. Pull the other one, really...

*PLONK!*


--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?"
 
Omicron said:
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the

instructions)

thats a fairly senseless spec.

, and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)
uh-oh


I am fairly adept with Electricity and Wiring,,,,

if you think the above is a fair spec, youre not adept enough.

and I am sure I
could wind a Transfomer, as long as I knew it was the right one, and
had some clear instruction.


I have been looking for ones to buy, but I dont know if one is the
right item, if I dont know what the other is to combine them
both.......

you need to know what psu you need first. 160vdc 4A 1kVA makes no
sense.

Does anyone know an economical way to render one of these, kit or
instructions availble somewhere ?

Most economical is a bridge rectifier, reservoir cap on 110v. But as
thats unisolated, it may be totally unsuitable. You'd need to know what
it is you need first, else you may wind up frying yourself.

So much jargon is so vague and
general, that it is not meant for the unexperienced.
exactly

thanks for your support

theyre supporting you staying alive rather than supporting you
achieving your foolhardy goal.


NT
 
C

CWatters

Jan 1, 1970
0
Omicron wrote:
Most economical is a bridge rectifier, reservoir cap on 110v. But as
thats unisolated, it may be totally unsuitable. You'd need to know what
it is you need first, else you may wind up frying yourself.

My guess is he needs and adjustable power supply but I agree the spec is
inconsistant. I think 110V 1:1 isolating transformers are available - what
do they use on building sites?
 
K

Ken Taylor

Jan 1, 1970
0
Omicron said:
I am merely repeating the instructions as have been given to me, by a
person who does not speak english. From a well accomplished project
that has numerous working models and videos !

I think the ones we should really be worried about is people who stalk
these news groups to prevert naive people looking for a little bit of
guidance and support. Any real Scientists, would be eager to help
people which is what these News Groups are supposed to be
about......... instead of prowling around and collecting websites,
about peoples misfortunes, (if not actually being responsible for
making them up) If there ever was anyone who offered their support,
things like that would have never happened in the first place, and
everyone would probably have Hydrogen Powered Homes and Vehicles years
ago and not be sucking exhaust pipes, or being witless victims of
societies dictation

I found the instructions and a kit (which is what I have been asking
for), for about 100$ ......... most of you people are only speculating
something you dont know jack shit about .............

as for the rest,,,,,, I also thank everyone here that has given their
support and make this group for what it is about ! thanks for your
encouragement
Another way of looking at it is that there are some 250 million people
in the US alone. Let's say 5% are believers of cold fusion and other
like-thinking technologies. Maybe only 5% of these are determined
enough, like yourself, to get the goods. So (you can correct my math if
you like) some 625,000 people should have the goods and be able to say
to the world that you were all right and the rest of us will be
gob-smacked and change to hydrogen power.

Yet it hasn't happened. Hmmmm.

Watch out for that power supply, it's lethal.

Cheers.

Ken
 
J

John Fields

Jan 1, 1970
0
I am merely repeating the instructions as have been given to me, by a
person who does not speak english. From a well accomplished project
that has numerous working models and videos !

---
Of what? Failures?

Surely nothing reproducible.
---
I think the ones we should really be worried about is people who stalk
these news groups to prevert naive people looking for a little bit of
guidance and support.

---
No, the ones we really have to be worried about are the con artists
who can get idiots like you to pay money for plans to build
equipment which can't possibly work.
---
Any real Scientists, would be eager to help
people which is what these News Groups are supposed to be
about.........

---
**** you, you insignificant piece of shit. What do you know about
real scientists? Absolutely nothing. You don't even have the
wherewithal to figure out how to wind a transformer and yet you
think you're qualified to make judgements about how 'real'
scientists should act? And how newgroups are supposed to be used?

This one's being used just right, right now, and it's being used to
allow me to tell you what a stupid **** you are.
---
about peoples misfortunes, (if not actually being responsible for
making them up) If there ever was anyone who offered their support,
things like that would have never happened in the first place, and
everyone would probably have Hydrogen Powered Homes and Vehicles years
ago and not be sucking exhaust pipes, or being witless victims of
societies dictation

---
Why don't you try talking about about something you know something
about, like stroking your dick back and forth while pretending that
some big black dick is working its way in and out of your ass, in
perfect synchrony with Mr. Palm?
---
I found the instructions and a kit (which is what I have been asking
for), for about 100$ ......... most of you people are only speculating
something you dont know jack shit about .............

---
OK, so educate us. Spill everything you think you know about what
you're talking about.
---
as for the rest,,,,,, I also thank everyone here that has given their
support and make this group for what it is about ! thanks for your
encouragement

---
Blah, blah, blah, blah fucking blah.

Since you're posting to three different groups, what do you mean by

"make this group for what it is about !"?

I don't think anyone gives a shit about your phony thanks, you
pretentious little prick. At least, I don't.

Grrrrr...
 
R

Richard

Jan 1, 1970
0
John Fields said:
---
Of what? Failures?

Surely nothing reproducible.
---


---
No, the ones we really have to be worried about are the con artists
who can get idiots like you to pay money for plans to build
equipment which can't possibly work.
---
<<snip>>

Now, don't hold back, John; how do you really feel about this poor ignorant
soul? ;-)

Richard Seriani
 
J

Jasen Betts

Jan 1, 1970
0
["Followup-To:" header set to sci.electronics.basics.]
My guess is he needs and adjustable power supply but I agree the spec is
inconsistant. I think 110V 1:1 isolating transformers are available - what
do they use on building sites?

RCDs / GFCBs (same thing different acronym


Bye.
Jasen
 
CWatters said:
My guess is he needs and adjustable power supply but I agree the spec is
inconsistant. I think 110V 1:1 isolating transformers are available - what
do they use on building sites?

I dont know about the US. But whatever he/she builds isnt going
anywhere anyway. If the OP demonstrated any valid knowledge or were
able to respond with fair points I'd accept an extremely remote
pico-glimmer of hope. But without that, as most of us know, OP's dead
in the water. Paying $100 for worthless paper that says build a 1kva HT
supply is just a recipe for a Darwin.


NT
 
A

Andy Baxter

Jan 1, 1970
0
Omicron said:
Hi - I need a 160 VDC 1KVA 4A Power Supply (is how it is termed in the

instructions) , and I am ignorant about 'either or both' VARIACS and
Isolated Transformers. (I have a 110VAC Variac and I use it, but not
in the case of Isolated Transformers)

How would you know if you /had/ proved the existence of cold fusion using
this kit?
 
R

Rich The Newsgroup Wacko

Jan 1, 1970
0
Omicron said:


How would you know if you /had/ proved the existence of cold fusion using
this kit?

You would die of radiation poisoning from the neutron flux. ;-P
--
Cheers!
Rich
------
"10 Reasons Why a Beer is Better Than a Woman:
1. Beer understands the difference between shooting down an
unidentified aircraft in a war zone and blowing a Korean airliner
out of the sky.
2. A beer would never own a car with an automatic transmission.
3. A beer never fishes for compliments.
4. Beer tastes good.
5. A beer can enjoy an evening of watching "Johnny-the-Wadd-Holmes'
Greatest Hits" as much as you do.
6. An ice-cold beer will nonetheless let you have your way with it.
7. A beer won't ask you to pick up some tampons when you go to the
store.
8. Beer never asks you to change the station.
9. A beer won't fill up your 'Vette with 85-octane gas because it's
twenty cents less expensive.
10. A beer won't make you eat experimental vegetarian meals that taste
like grass."
 
C

CWatters

Jan 1, 1970
0
I dont know about the US. But whatever he/she builds isnt going
anywhere anyway.

Well perhaps you are right. If they can't sort out the power supply on their
own how will they manage the tricky calorimetry?
 
Top