Common Emitter Amplifier with 2N3904

[Paul Burridge]

I have a solid record of providing REAL help to REAL people. The same
cannot be said of you- you are worthless trash who thinks SED is your
personal chat room. You have absolutely NOTHING to offer-and the other
contributors have already told you to take your elementary drivel to the
basics newsgroup. You never built anything in your life- you are a
dilettante and talker- too dumb to even run simulations and learn
electronics at the community college first semester level. You are a
total waste of time and it is people like you who are responsible for
USENET being abandoned by all but the trite-minded pedants. Like I said-
you are supeficialsuperficiala retiree idling away the last hours of
your waste of life- be sure and donate your organs or something useful.

Oh dear. Fag-lover Fred's got his panties in a bunch over somethin'
again. I *do* build continually, asswipe. only today I finished the
pcb for analogue's RFSM. The day before I wound the coils and yes, it
took me *all day* to wind just two coils and get them trimmed *and
trimmable* to 1uH a-piece because my eyes ain't so good and my hands
shake like autumn leaves in a gale without a stiff slug of Jack first.
Maybe everything comes easy to you. It's *never* done for me - ever.
But I keep on fighting. Plus I do have a very rich world-wide circle
of friends and we trust each other implicitly with our lives and
there's nothing we wouldn't do for each other. How many *true* friends
do you have, Bloggs?

 

[Fred Bloggs]

Oh dear. Fag-lover Fred's got his panties in a bunch over somethin'
again. I *do* build continually, asswipe. only today I finished the
pcb for analogue's RFSM. The day before I wound the coils and yes, it
took me *all day* to wind just two coils and get them trimmed *and
trimmable* to 1uH a-piece because my eyes ain't so good and my hands
shake like autumn leaves in a gale without a stiff slug of Jack first.

Your blatant display of homophobia and macho lifestyle in one paragraph
pretty much spells pretentious closet poof. There's no way it takes all
day to wind two identical air-coils at 1uH, or make a PCB- UNLESS you
spend all your time on USENET and getting drunk, which is the most
likely scenario.

Maybe everything comes easy to you. It's *never* done for me - ever.

Finally you say something credible.

But I keep on fighting. Plus I do have a very rich world-wide circle
of friends and we trust each other implicitly with our lives and
there's nothing we wouldn't do for each other. How many *true* friends
do you have, Bloggs?

More of your BS... why don't you move somewhere with no Internet then.

 

[Paul Burridge]

Lily Bepant wrote:

Lemme see- you know about the various load lines, gains, and I/O
impedances, and reading data sheets- but you pretend you can't do a DC
bias? This makes no sense- you are a troll. Trolls are generally of low
intelligence, love to pseudo-intellectualize over definitions, and
usually deal with an elementary circuit that just will not work for some
reason.

Allow me to apologize for Bloggs. He's well known here as an
argumentative trouble-maker and appears to have a screw or two lose.
You can tell most trolls a mile away by the fact that they haven't the
*GUTS* to post under their real names. That's all you need to know -
avoid reading responses from wankers with soubriquets.
PS: he's probably a misogynist as well. (erectile dysfunction
responsible for that, no doubt).

 

[Paul Burridge]

Probably the reason nobody mentioned it is that it's not true.

Bloody hell another careless typo! Thanks for drawing my attention to
it, John. I meant to say that if RE is bypassed, the Vgain will be
RC/re for the unloaded stage. (or RC||Zin(next stage)/re if the stage
drives a following stage.
HTH.

 

[Fred Bloggs]

Allow me to apologize for Bloggs.

You don't represent NG and not in any position ot apologize.

He's well known here as an
argumentative trouble-maker and appears to have a screw or two lose.

Not quite as well-known as you are to be a brain-dead
pseudo-intellectual loiterer and ignorant idiot....Trouble is coming
your way- poofy.

You can tell most trolls a mile away by the fact that they haven't the
*GUTS* to post under their real names. That's all you need to know -
avoid reading responses from wankers with soubriquets.

My responses will be hard to ignore- blatantly exact descriptions of
exactly what you are- a waste of time and phony.

PS: he's probably a misogynist as well. (erectile dysfunction
responsible for that, no doubt).

I am sure you know FAR more about that than I, limpy.

 

[Fred Bloggs]

Bloody hell another careless typo!

This seems to be your standard *cowardly* way of getting out from under
shooting your dumb mouth off where you have no business. You are nothing
but typos-and the OPs post here to get responses from people who know
what they're doing- that means NOT you.

[..snip drivel...]

 

[Jim Thompson]

I have a solid record of providing REAL help to REAL people. The same
cannot be said of you- you are worthless trash who thinks SED is your
personal chat room. You have absolutely NOTHING to offer-and the other
contributors have already told you to take your elementary drivel to the
basics newsgroup. You never built anything in your life- you are a
dilettante and talker- too dumb to even run simulations and learn
electronics at the community college first semester level. You are a
total waste of time and it is people like you who are responsible for
USENET being abandoned by all but the trite-minded pedants. Like I said-
you are supeficialsuperficiala retiree idling away the last hours of
your waste of life- be sure and donate your organs or something useful.

Careful with that organ donation idea, Fred! Don't want to pass on
any bad genes ;-)

...Jim Thompson

 

[Paul Burridge]

You don't represent NG and not in any position ot apologize.

Hey, new people here might get the mistaken idea that everyone's as
rude, ignorant, hostile and unhelpful as you are.

Not quite as well-known as you are to be a brain-dead
pseudo-intellectual loiterer and ignorant idiot....Trouble is coming
your way- poofy.

Trouble coming *my* way? From *you* little man? LOL!!! Whereabouts are
you posting from, anyway? Tell us your real name and where you are and
I might take your ringingly empty threats a bit more serously...

My responses will be hard to ignore- blatantly exact descriptions of
exactly what you are- a waste of time and phony.

You're the biggest waste of space and PoS on this group, phoney. You,
Dark Matter, Phil Allison and Genome. "Newsgroup Contributors"
ROTFLMAO!

 

[Fred Bloggs]

Trouble coming *my* way? From *you* little man? LOL!!! Whereabouts are
you posting from, anyway? Tell us your real name and where you are and
I might take your ringingly empty threats a bit more serously...

You just let us know date/place of your next entry into US- there will
be no threat to it- a prediction- watch out for shoelaces. You sound
exactly like a drunken, bureaucratic British Army retiree- thirty years
of shuffling forms around and you don't have two functioning brain cells
left.

You're the biggest waste of space and PoS on this group, phoney. You,
Dark Matter, Phil Allison and Genome. "Newsgroup Contributors"
ROTFLMAO!

Given your comprehension level of about 0.1%, your assessments are void.

 

[Bill Sloman]

Hey, new people here might get the mistaken idea that everyone's as
rude, ignorant, hostile and unhelpful as you are.

Fred Bloggs may be rude and hostile, but he isn't ignorant or
unhelpful. He probably hasn't helped you, but you do seem to be beyond
help.

Trouble coming *my* way? From *you* little man? LOL!!! Whereabouts are
you posting from, anyway? Tell us your real name and where you are and
I might take your ringingly empty threats a bit more serously...


You're the biggest waste of space and PoS on this group, phoney. You,
Dark Matter, Phil Allison and Genome. "Newsgroup Contributors"
ROTFLMAO!

Genome knows more about switching power supplies than you could
possibly appreciate, and probably more than Fred Bloggs. Both Genome
and Fred seem to be streets ahead of Dark Matter and Phil Allison, not
to mention you, Paul.

You are suffering delusions of adequacy. Go away and try and design
something - it should re-instill a proper feeling of humility into you
bumptious little soul.

 

[Lily Bepant]

Hello,

Lemme see- you know about the various load lines, gains, and I/O
impedances, and reading data sheets- but you pretend you can't do a DC
bias? This makes no sense- you are a troll. Trolls are generally of low
intelligence, love to pseudo-intellectualize over definitions, and
usually deal with an elementary circuit that just will not work for some
reason.

I, may be knowledgeable and well educated enough to troll in Linux,
systems programming or microprocessors groups, but not in electronics.

Can't you simply realize the fact that I don't know electronics enough
to build a simple BJT amplifier DOES NOT mean that I'm too dumb to
read books or just google!

Information on load lines may be found in any Electronics book, even a
non-electronics major like me can understand a basic analytic geometry
axiom that the optimum point is the point that the two lines
intersect! (I also have studied operation research well)

Data sheets are flying everywhere on the web in PDF format, just try
to search.

Just THINK a little before pre-judging people.

And yes, I still can't do a DC bias. But I'm close to it.

You might spend your time answering the question if it's that simple.
That way, you would be more appreciated. Do you know that feeling? To
be appreciated? I don't think so.

(What? Do you call this a flame-bait then?)

Thanks for all the guys who answered my question.

 

[Lily Bepant]

Hello,

The way you specified your question, '4.7 kohm load', doesn't give
enough information to justify an assumption that this load is AC-
coupled. That's why I, and others, assumed it was the collector
resistor. If it's AC-coupled, then the data you provided is
insufficient to produce a solution without yet more assumptions.

In fact, I don't know if it is so or not.
That's the question I copied and pasted here.
I'm coming to a conclusion to the subject and going to post what I
have found here. I think you will be able to comment on this and
correct me more accurately.

Thank you.
Lily

 

[grim]

Hey, new people here might get the mistaken idea that everyone's as
rude, ignorant, hostile and unhelpful as you are.




Trouble coming *my* way? From *you* little man? LOL!!! Whereabouts are
you posting from, anyway? Tell us your real name and where you are and
I might take your ringingly empty threats a bit more serously...




You're the biggest waste of space and PoS on this group, phoney. You,
Dark Matter, Phil Allison and Genome. "Newsgroup Contributors"
ROTFLMAO!

ya know, i recently decided to start getting back into the newsgroups
and i see people arguing and flinging threats at each other? wow... i
didn't miss out on much over the 10 years i was gone.

guys, life ain't that bad. just take a deep breath and remember that
the other one is just a little blip of electricity on the end of a wire
on the other side of the freakin' planet. besides, arguing on the
internet is like competing in the special olympics; even if you win,
you're still retarded. just drop the other one into an ignore list or
whatever you need to do to NOT see the other one and let's all get back
to talking about what we are passionate for...

ELECTRONICS! <waits for cheering to stop>


grim

 

[John Woodgate]

I read in sci.electronics.design that Bill Sloman <[email protected]>

Both Genome
and Fred seem to be streets ahead of Dark Matter and Phil Allison,

No, Phil knows about things; they are just not those that often come up
in s.e.d. But I do fail to understand why he and Fred Bloggs need to be
so aggressive, our Kevin as well. They DON'T have anything to prove.

Genome is a special case, a very special case.

 

[John Woodgate]

I read in sci.electronics.design that Lily Bepant <[email protected]>

Information on load lines may be found in any Electronics book, even a
non-electronics major like me can understand a basic analytic geometry
axiom that the optimum point is the point that the two lines
intersect! (I also have studied operation research well)

The load-line approach is out of favour at the moment, so your citing of
it could be seen as a bid by a tyro for specious superiority. SED is a
bit sensitive to that, due to recent experience.

 

[John Woodgate]

I read in sci.electronics.design that Lily Bepant <[email protected]>

Hello,

In fact, I don't know if it is so or not.
That's the question I copied and pasted here.

We often find badly-formulated questions. The trouble with them is that
they still require answers.

 

[Paul Burridge]

Fred Bloggs may be rude and hostile, but he isn't ignorant or
unhelpful. He probably hasn't helped you, but you do seem to be beyond
help.

Certainly beyond *your* particular type of 'help', Bill, yes.

Genome knows more about switching power supplies than you could
possibly appreciate, and probably more than Fred Bloggs. Both Genome
and Fred seem to be streets ahead of Dark Matter and Phil Allison, not
to mention you, Paul.

Oh, yes, your fellow countryman Genome. Just remind me about the two
latest threads he's spawned... Can't recall? First one about his piles
and the other one about his 'waterworks' - let's use the euphamism.
Fascinating stuff for you, though, I'll wager.

You are suffering delusions of adequacy. Go away and try and design
something - it should re-instill a proper feeling of humility into you
bumptious little soul.

GFY, Slowman. I need no lectures from the likes of you. All you ever
share with us here is your own peculiar brand of far-left politics,
latterly shown up in that long-running and totally irrelevant,
off-topic thread about gun control in Australia. As if anyone gives a
shit about that on an electronics discussion group!

 

[Paul Burridge]

Hello,

I, may be knowledgeable and well educated enough to troll in Linux,
systems programming or microprocessors groups, but not in electronics.

Can't you simply realize the fact that I don't know electronics enough
to build a simple BJT amplifier DOES NOT mean that I'm too dumb to
read books or just google!

Anyone with half a brain can see that, dear lady. Once again I
apologize for the ignorance and bigotry you've had to suffer from some
of the no-account time-wasters on this group.
If person A tries to explain something to person B and the message
doesn't get through, these dopes instantly jump to the conclusion
that the recipient must be mentally deficient. The possibility that
they *themselves* might simply not be articulate enough in the English
language to adequately express themselves never seems to occur to
them! I don't doubt your intelligence and genuosity; these lame-brains
obviously do. You've just been terribly unlucky in the straws you've
drawn for this particular question. Infinitely more chaff than wheat,
I'm sorry to say. :-(

 

[Ian Bell]

Hey, new people here might get the mistaken idea that everyone's as
rude, ignorant, hostile and unhelpful as you are.

I have not been lurking/posting here very long but I soon began to recognise
the general tone of Mr. Bloggs' posts. There seems to be an individual
much like him on every newsgroup. Fortunately the regulars soon learn to
ignore them but it can be quite disconcerting for newcomers. I sometimes
wonder just why they take the attitude they do, is it deleiberate or do
they genuinely not know how odd they are?

Ian

 

[Fred Bloggs]

Information on load lines may be found in any Electronics book, even
a non-electronics major like me can understand a basic analytic
geometry axiom that the optimum point is the point that the two lines
intersect! (I also have studied operation research well)

Optimum point? How about the solution of simultaneous equations? The
load line is a graphical means of solving Kirchhoff's law in the collector
circuit subject to the constraint of complex Ic=I(Vce,Ib) behavior for
the transistor.
Usually you have Vcc=Ic*Rc + Vce + Ic(1+1/beta)*Re which is rewritten as
Ic=(Vcc-Vce)/(Rc+Re) taking 1/beta<<1, the equation of a straight line
on the CE Ic vs Vce characteristic, Ic-axis intercept of Vcc/(Rc+Re) and
Vce-axis intercept of Vcc. The intersection of this line with the
nonlinear transistor Ic=I(Vce,Ib) characteristic is therefore that
unique combination of (Ic,Vce) satisfying the external circuit I-V
requirements subject to the transistor Ic-Vce behavior for a fixed value
of base current Ib.

Data sheets are flying everywhere on the web in PDF format, just try
to search.

Just THINK a little before pre-judging people.

And yes, I still can't do a DC bias. But I'm close to it.

You have been told time and again that your question is inadequate- but
you refuse to address that- because you are a troll. You do in fact know
a little about setting up DC bias points, and seeing NG responses
somewhat less articulate than the pabulum textbook you are using makes
you feel superior.