Maker Pro
Maker Pro

comp wont start after plugging into 230v plug

i forgot to switch to 230v when plugging in my american desktop in
france, there was a pop, and now it wont start. did i completely break
it or is there a circuit breaker or something i can fix
 
A

Anthony Fremont

Jan 1, 1970
0
i forgot to switch to 230v when plugging in my american desktop in
france, there was a pop, and now it wont start. did i completely break
it or is there a circuit breaker or something i can fix

You need a new power supply and possibly everything else. :-( Hopefully
the pop occurred as soon as you plugged it in and not when you pushed the
button on the front of the pc. If so, you may have lucked out. Good luck
to you. :)
 
J

JeffM

Jan 1, 1970
0
alexeiofnewark@ gmail.com said:
is there a circuit breaker or something i can fix

What you have done here
http://groups.google.com/groups/sea...RECQ4tr5k43uytiDKbEn1fjJfYkQTWXi1Vg&scoring=d
is selfish and inefficient
http://groups.google.com/group/sci....many-groups+one.newsgroup+*-*-limit-*-posting

The last half of this thread explains
how to better do what you are trying on Usenet
(if you can't be convinced to post to one newsgroup only):
http://groups.google.com/group/sci....ups+*-*-*-*-two-groups-*-*-aren't-*-different
 
C

Charles Schuler

Jan 1, 1970
0
What you have done here is selfish and inefficient

Agreed. And it gets worse and worse. They are indeed the center of their
own universes.
 
Top