Maker Pro
Maker Pro

Compatibility issue!

hikmatune

Apr 3, 2013
2
Joined
Apr 3, 2013
Messages
2
Hello,

Can someone please confirm the LC46SV50U Shap TV manual in PDF can be found click here (see page 41 power details) and the step down transformer click here are compatible?

Thanks heaps
 

GreenGiant

Feb 9, 2012
842
Joined
Feb 9, 2012
Messages
842
that should work, just be wary the transformer is only rated for 300W peak and the TV is rated at 210W, while this is enough as the transformer ages it will start losing output power, also when the TV turns on there may be a power spike which the transformer may not like.

If you can find one that is 400+W you would probably have a longer life out of it, but for a quick fix than the one linked is fine.
 
Top