Maker Pro
Maker Pro

Component Identification Help!!!

zombiehawk

Jun 18, 2011
8
Joined
Jun 18, 2011
Messages
8
Hi everyone,
Just wanted to know what component this is. I salvaged it from an old AM pocket radio.
The writing says JET 56K.
The LED is just for size reference.
Thanks in advance.131120111588.jpg
 

Resqueline

Jul 31, 2009
2,848
Joined
Jul 31, 2009
Messages
2,848
That's a coil/ choke/ inductor, probably 56uH.
Here's an example of what it looks like inside the sleeve.
leaded-inductor-457.jpg
 

zombiehawk

Jun 18, 2011
8
Joined
Jun 18, 2011
Messages
8
Hey thanks Resqueline, knowing what the component is makes it a bit more easier to rebuild the receiver. Much obliged.:D
 
Top