Maker Pro
Maker Pro

Component identification

Nemo1956

Sep 5, 2016
34
Joined
Sep 5, 2016
Messages
34
Can anyone help me identify this component.
The unit is a HP E4438B signal generator that has an un levelled fault.
I have located the problem in the A9 (output board) unit.
The component has an ID of H1 on it and its location number is Q1800 on the PCB.
I think this is some sort of MOSFET/AMP device but I need a replacement or equivalent one.
Has anyone found these devices or know of a replacement?
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Schematic? Photo? Link even?

We are always will to assist but you can;t seriously expect us to go and find 'everything' we need when you have it right at hand?
 

davenn

Moderator
Sep 5, 2009
14,262
Joined
Sep 5, 2009
Messages
14,262
gosh, thought I had already responded to this thread with the same request
 
Top