Comunicate FPGA to Ethernet

[Himlam8484]

Hi people,

In last my design, I made a fpga board using IC xc3s400. Now i would
like to modify it some following things. I want to add a part into
Fpga board. I want to use a chip W5100 to comunicated between FPGA
board with ethernet.

Do any one can give me some ideas? I hope that someone worked with
this chip and got some experienced. please show me.

i lloking forward hearing from people soon

Him Lam

 

[Rich Grise]

In last my design, I made a fpga board using IC xc3s400. Now i would like
to modify it some following things. I want to add a part into Fpga board.
I want to use a chip W5100 to comunicated between FPGA board with
ethernet.

Do any one can give me some ideas? I hope that someone worked with this
chip and got some experienced. please show me.

i lloking forward hearing from people soon

Well, you seem to already know how to work with the XC3S400 - there's a
data sheet and stuff on the W5100 here:
http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=ETH014&Category_Code=ETH

It looks like a matter of connecting it to a port and learning how to
control it, and writing a driver in the FPGA.

Good Luck!
Rich

 

[Himlam8484]

Well, you seem to already know how to work with the XC3S400 - there's a
data sheet and stuff on the W5100 here:http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=ETH0...

It looks like a matter of connecting it to a port and learning how to
control it, and writing a driver in the FPGA.

Good Luck!
Rich

Hi Rich,

Thank you for your supporting. I find many useful document from it. I
also some new ideas for my design based on this chip.

Lam