Maker Pro
Maker Pro

Confused and needing help

steviestv8

Jun 1, 2013
2
Joined
Jun 1, 2013
Messages
2
Alright I recently bought a buck that says it is able to give me a constant current between 150-1500mA. This is great since I love working with less. However I can't figure out how to get more then 150mA I have tried different voltages and what not but am just lost and kinda annoyed. The buck I bought was this one http://www.sureelectronics.net/goods.php?id=2184 . Please anyone help me I don't know why this is not working and confusing me. Thanks!
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
The whole point of a constant current source is that changing the voltage won't change the current, so that behaviour is expected.

Looking at that link, there are jumpers which are changed to set the current.
 
Top