How would I connect two 5 pin halo momentary switches to an Adafruit soundboard (2mb, inbuilt amp) to trigger the audio? I am powering the board with usb and the momentary switches with a battery pack. I am trying to also keep the switches led light on always instead of off and on when pressing the down on the switch.
This is the board I'm using: https://core-electronics.com.au/adafruit-audio-fx-sound-board-2x2w-amp-wav-ogg-trigger-2mb.html
- Thanks, Jensen
This is the board I'm using: https://core-electronics.com.au/adafruit-audio-fx-sound-board-2x2w-amp-wav-ogg-trigger-2mb.html
- Thanks, Jensen