Maker Pro
Maker Pro

Connect Switch Receiver

pirate7seas

May 12, 2017
6
Joined
May 12, 2017
Messages
6
Hey folks,
I have a garage door in my house and I lost all remotes control , and i
buy (Remote Control Switch Transmitter+ Receiver)

Specifications\\\
voltage :DC12V
Static current:≤10MA
Output current:≤7A
Frequency :315MHZ/433MHZ
Receiver sensitivity:-95DB

but I could not connect with board of garage door, I hope Get help here

thanks ...
 

Attachments

  • 1.jpg
    1.jpg
    68.6 KB · Views: 47
  • 2.jpg
    2.jpg
    29.9 KB · Views: 46
  • 3.jpg
    3.jpg
    291.7 KB · Views: 43
  • 4.JPG
    4.JPG
    231.4 KB · Views: 44
  • 5.jpg
    5.jpg
    53.4 KB · Views: 46

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
Most garage door openers have a remote push button to open/close door mounted inside the garage. I would guess the relay contacts (com,no) would need to be (parallel) spliced at the point where that push button needs to terminate.
Read the garage door manual.
 

pirate7seas

May 12, 2017
6
Joined
May 12, 2017
Messages
6
Unfortunately, there is no manual of garage door :( , you can tell me any idea ... I'm ready to try
 

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
You said you lost all of your remote controls for your garage door opener.
So, If this is an existing garage door opener, post a picture of its control board so we can see the wiring.
The picture you posted doesn't have any wires going to it.
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
I'd be surprised if there was not an after-market keyfob available on Ebay or similar.
What is the type/model/brand of the door?
 

pirate7seas

May 12, 2017
6
Joined
May 12, 2017
Messages
6
This new device (receiver) with 3 remote, I want to connect it with board of garage
 

Attachments

  • 89B5A016-153A-4033-B84F-B06BD6CC2E35-1158-0000014CBEBE058D.jpeg
    89B5A016-153A-4033-B84F-B06BD6CC2E35-1158-0000014CBEBE058D.jpeg
    68.6 KB · Views: 42
  • FEE50402-5B93-4316-8558-40ADEACC57EA-1158-0000014CD5E73F08.jpeg
    FEE50402-5B93-4316-8558-40ADEACC57EA-1158-0000014CD5E73F08.jpeg
    29.9 KB · Views: 46

pirate7seas

May 12, 2017
6
Joined
May 12, 2017
Messages
6
I'd be surprised if there was not an after-market keyfob available on Ebay or similar.
What is the type/model/brand of the door?

It's hard to find a remote for this original receiver, so I bought another one
 

Attachments

  • IMG_2455.JPG
    IMG_2455.JPG
    137.7 KB · Views: 37
  • IMG_2457.JPG
    IMG_2457.JPG
    273 KB · Views: 39

pirate7seas

May 12, 2017
6
Joined
May 12, 2017
Messages
6
This image contains two devices I want to connect to some,
 

Attachments

  • A6343AFC-BF93-4914-B07E-946DA38DDC12-1158-000001504A66996E.jpeg
    A6343AFC-BF93-4914-B07E-946DA38DDC12-1158-000001504A66996E.jpeg
    53.4 KB · Views: 43

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
Please respond to what I said
You said you lost all of your remote controls for your garage door opener.
So, If this is an existing garage door opener, post a picture of its control board so we can see the wiring.
The picture you posted doesn't have any wires going to it.
 

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
As I understood the reply from the OP, the new unit is a general purpose remote, in no way associated with the door.
Yes, but he also has a (matching?)receiver that may interface with his existing opener control board.
I agree, the place to start is understanding what make and model opener were dealing with.
 
Top