Maker Pro
Maker Pro

Connector ID Reward!!!

RMass187

May 8, 2011
3
Joined
May 8, 2011
Messages
3
Need help identifying the connector that fits this or a lead to the manufacturer. In the first picture the number on the side is 8113. The other numbers are 100916-2, 11936-C (I think its a hex color code) and 120 deg (spread pattern maybe). It is an LED light that illuminates the door panel pocket on a Chrysler 300. First person that gives me info to find this connector will get $10 in their Payapl account. Need this info yesterday. Thanks for any help

IMG_1183.jpg

IMG_1182.jpg

IMG_1181.jpg

IMG_1180.jpg
 

nbw

May 8, 2011
48
Joined
May 8, 2011
Messages
48
Crumbs, that's a tough one. Has it died and you need to replace it? You might be able to do a little bit of delicate SMT soldering and use the plastic parts you have?
 

RMass187

May 8, 2011
3
Joined
May 8, 2011
Messages
3
No, it works fine. Doing an interior conversion and don't have this connector. Junk yards are less than helpful. Maybe if someone can ID the manufacturer by the symbol?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
It may not be a standard connector. The manufacturer may have dreamed up their own propriety connector to stop people easily being able to interconnect.
 
Top